MT Company's Blog

Specifications

Notes:

• Magazine holds approximately 50 BBs
• Starter pack of approximately 200 BBs
• Includes batteries for laser, flashlight, and scope
• Removable Carry Handle
• Side grips come off so that battery compartment can be accessed
• Semi/Full/Safety Switch
• Press integrated safety button on hand grip to fire
• Adjustable stock to fit a variety of shooters
• Heavy in comparison with other LPEGs

Pictogram:

M4 M83A2 Airsoft Gun

1. Model M83A2 M4 airsoft rifle
2. Electronic red crosshair scope w/ brightness settings
3. Adjustable metal laser
4. Tactical R.I.S. flashlight
5. Batteries for flashlight
6. R.I.S. Foregrip
7. Mock silencer barrel
8. Flash hider barrel
9. Rifle sling
10. Screw driver
11. Laser mounting accessories, etc.
12. Safety Glasses
13. 7.2v 250 mAh (output) battery charger
14. Speed loader/Unjamming Stick

M4 M83A2 Airsoft Gun

Starting upper left rotating clock wise: A flap on the gun’s side swings out so that the adjustable hop up slider can be adjusted. The side grips come off so the battery compartment can be accessed. The carry handle with the rear sight is removable so that a scope can be mounted. A retractable stock on the M83 A2 version extends to the desired length (shown fully extended).

Specifications

Notes:

• Removable clear hopper magazine holds approximately 500 BBs
• Starter pack of approximately 150 BBs
• Includes batteries for flashlight and scope
• On/Off Safety Switch below trigger
• The Flashlight provided has a Bright Bluish tone
• Lightweight and Compact attributes make this gun ideal for CQB
• Louder than most LPEGs

Pictogram:

P90 D90H Airsoft Gun

1. Model D90H P90 Airsoft Rifle
2. Electronic red crosshair scope
3. Ring clamp mount for red crosshair scope
4. Tactical R.I.S. flashlight
5. Stand up net target accessory
6. Screw driver
7. Mock silencer with threaded brass tube
8. 7.2v 250 mAh (output) battery charger
9. 7.2v 400 mAh Ni-Cd rechargeable battery
10. Safety Glasses
11. Manufacturer supplied starter Bbs
12. Rifle sling
13. Unjamming stick

P90 D90H Airsoft Gun

Starting upper left rotating clock wise: The clear see-thru hopper magazine has a sliding door which opens to allow up to 500 bbs to be poured in. The hopper magazine comes of just like the one on the real gun. The switch integrated below the trigger has two settings: On or Off, it is basically a safety. The stock pad opens up like a door to reveal the battery compartment.

P90 D90H Airsoft Gun

Left to Right: The tactical flashlight on this airsoft gun is reasonably bright compared to others supplied with similar guns. When fully set up, the net target proves to be lots of fun for indoor and outdoor practice. Only two paper targets are provided, but more can be copied or printed off the internet.

Specifications

Notes:

• High Capacity Internal Hopper holds approximately 300 BBs
• Starter pack of approximately 350 BBs
• Compact and lightweight build makes this airsoft gun ideal for CQB
• The Battery is disguised as a clip
• Tends to misfire if held with at downward slant

Pictogram:

Uzi D91 Airsoft Gun

Starting upper left rotating clock wise: The charging handle on top slides back, a nozzle capped bottle will quickly load the internal hopper. Located on the right side of the gun is a functional safety switch. A bayonet lug enables the use of a bayonet or other accessories with a rail mount adapter. The clip disguised battery fits snugly into the hand grip and locks in place.

Uzi D91 Airsoft Gun

On the inside of this Uzi airsoft gun lies some simple and lightweight components. There is an aluminum barrel, trigger assembly, electrical wiring, and gearbox/motor block. The hopper visibly slants down to were bbs drop into the firing chamber.

Uzi D91 Airsoft Gun

The gearbox has the motor integrated into it. It is made of tough clear plastic and the gears are as well save for a white color. The motor is a mass production model on the larger end of those found in toys sold at your local retailer. A greased connection between the motor and gear shows the simplicity in the design.

Specifications

Notes:

• High Capacity magazine holds approximately 400 BBs
• Starter pack of approximately 350 BBs
• Magazine has an internal bb compartment and a dial on the bottom which is wound to set bbs in line to be fired. (no bbs in compartment= unwind, not enough wind= few shots, too much wind= unwind)
• Safety/Semi/Full Switch realistic as on real gun except for order of semi and auto modes
• Realistic wood patterned plastic
• Orange tip is somewhat large

Pictogram:

AK47 CM022 Airsoft Gun

1. Model CM022 AK47 Airsoft Rifle
2. 7.2v 700 mAh Ni-Cd Rechargeable Battery
3. 7.2v 200 mAh (output) Battery Charger
4. High Capacity Wind Up Magazine (holds approx. 400 BBs)
5. Rifle Sling
6. Safety Glasses
7. Manufacturer supplied starter BBs
8. Cleaning rod/ Unjamming stick

AK47 CM022 Airsoft Gun

Starting upper left rotating clock wise: The switch on the gun is authentic except for the order of the modes which is Safety, Semi, and Full Auto (On real gun Semi & Full Auto reverse). The gun also features an adjustable rear sight for distance – slide the sight up for long range shots. As can be seen, the battery connector is somewhat different from the one normally seen on other similar airsoft guns. The stock pad slides off to reveal the battery compartment and one of the many weights distributed throughout the gun.

AK47 CM022 Airsoft Gun

Starting upper left rotating clock wise: The door to the integrated bb compartment in the magazine can easily be opened with the finger to allow for about 400 bbs to be poured in. The bottom end of the magazine has a wind up ratchet wheel that lines up bbs for firing through the hole seen in the top. This ratchet wheel can be difficult to learn as the following applies: no bbs in compartment= unwind, not enough wind= few shots, too much wind= unwind. The plastic stick provided with the gun doubles as a cleaning rod and unjamming stick.